Coverage: 100 – 110 sq.ft./lt (10 sq.m./lt)
Surface Preparation:
- Remove wax by scrubbing with turpentine or thinner.
- Wash thoroughly to make sure the dust or traces of wax removed and allow to dry
- Painted floors must be abraded with sand paper.
Directions for Use: Mix the activator and base prior to use. Mix one part of activator with one part of base and allow to stand for 5 minutes. Mix only adequate quantity for use within 1 hour. Dilute first with a 10 – 20% Dulux Epoxy Thinner when applying on new cement floors ( 2 coats needed). One coat is sufficient for a previously painted surfaces (Test the compatibility on a previously painted surface prior to applying). Leave over 24 hours to dry.