Surface Preparation: Surface must be sound, clean and dry. Make sure grease, oil and similar contaminants are removed. Any roughness on the surface must be sanded down to achieve a smooth surface (Sanding must be done in the direction of the grain). Old varnish coatings or previously applied stains should preferably be removed back to bare wood.
Direction for Use: After proper surface preparation, apply 1 – 2 coats of un thinned wood sheen (Depends on wood colour and expected colour strength). Overcoat with Dulux Wood care Exterior Varnish. Stir well before use.
Dilution: Thinning with Dulux Thinner 850-8
Drying time: Re coat drying in 16 – 24 hours.
Coverage: 15 – 16 square meters per litre.
Cleaning Up: Clean brushes immediately after use with Dulux Thinner 850-8 or Mineral Turpentine.